Edge GUARD/DEPTH GAUGE SERIES Manuel d'utilisateur télécharger pdf (Page 15)

Once cutter has been led, the leading edge, when viewed from the side,

should hook slightly forward (A). The cutting edge at the outermost tip of

the top plate should be slanted at 60°. The chain will cut best when all cut-

ters are led to the same length (B).

Maintaining TriLink Saw Chain

TWO

60º

THREE

FOUR

New Cutter Cutter Filed Down

Depth Gauge Untouched

Cutter Filed Down

Depth Gauge Filed Down

Depth Gauge Setting Depth Gauge Setting Depth Gauge Setting

CAUTION: Do not alter guard link tangs (C) except when ling depth

gauges. Do not le cutter more than recommended and do not exceed

depth gauge clearance. Any deviation from these recommendations will

greatly increase the danger of kickback.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Pas de commentaire

Edge GUARD/DEPTH GAUGE SERIES Manuel d'utilisateur Page 15