Edge GUARD/DEPTH GAUGE SERIES Manuel d'utilisateur télécharger pdf (Page 25)

Guide Bar Failures

In addition to poor saw chain maintenance, the added pressure

and friction of forcing a cut will lead to damage and wear on your

guide bar. Heat will continue to build up from the added pressure

softening the guide bar rails. The additional pressure from the saw

chain on the chain lead-ins will bend the guide bar rails outwards.

The risk of pinching the guide rails is also high when applying

added pressure to your cut. A pinched guide rail will cause your

saw chain to catch on the compressed areas resulting in your

saw chain binding.

Excessive damage to the guide rails and guide bar (bending,

cracking, twisting) will result in needing a replacement bar.

Proper maintenance of your saw chain will ensure a longer life

for your guide bar, limit the damage and wear to the guide rails,

and provide a cleaner, safer cut.

BENT RAILS PINCHED RAILS

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Pas de commentaire

Edge GUARD/DEPTH GAUGE SERIES Manuel d'utilisateur Page 25