Edge CTS Guide de l'utilisateur télécharger pdf (Page 11)

Edge Products ______________________________________GM Juice-Attitude CS/CTS

2. Route the turbo timer wire with the red female connector end into the side of the fuse

box to connect the turbo timer.

3. Locate and remove the 10 amp “TBC BATT” from inside the engine compartment fuse

panel.

4. Insert the Leaded Fuse Link (see figure 11). The leg with the wire soldered to it needs

to plug into the “HOT” side of the fuse location. Orient the fuse exactly as shown in

fuse box picture below.

5. Plug the routed turbo timer cable (routed in step 2) into the leaded fuse link connector.

Note: The Turbo timer will not function unless the vehicle has the Attitude CS/CTS

monitor installed.

LEADED FUSE LINK

Note: Reference the Diesel chart inside the fuse box cover or operators manual for fuse

identification.

To Firewall

WIRE

Leaded

Fuse Link

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Chrisfoomo 26 Apr 2024 | 22:39:06

Hello, im noob :)

Edge CTS Guide de l'utilisateur Page 11