Edge CTS Guide de l'utilisateur télécharger pdf (Page 21)

Edge Products ______________________________________GM Juice-Attitude CS/CTS

Note: If the Juice module had previously been installed with the 3- position power level

switch or another Edge device, the switch cable will have to be disconnected or removed

to allow the CS/CTS Attitude cable to be installed. Carefully lift the latch on the Juice

connector side to allow the connector to release.

4. Route the EAS cable through the main grommet or other suitable hole in the firewall,

and into the cab of the vehicle (under the dashboard). Secure any excess cable to the

firewall with supplied nylon ties.

Run the EAS cable

with the 6-pin CS/CTS

device connector

through a rubber

rommet into the cab.

Juice

Attitude

Connector

EAS JAB

Connector

Lift latch to

disconnect

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Chrisfoomo 26 Apr 2024 | 22:39:06

Hello, im noob :)

Edge CTS Guide de l'utilisateur Page 21