Edge CTS Manuel d'utilisateur télécharger pdf (Page 4)

TABLE OF CONTENTS

Installation Instructions

EAS

TABLE OF CONTENTS INTRODUCTION HARDWARE INSTALLATIONS MYSTYLE SOFTWARE

INTRODUCTION

Installation Instructions

EAS

TABLE OF CONTENTS INTRODUCTION HARDWARE INSTALLATIONS MYSTYLE SOFTWARE

A B O U T T H E E A S

ABOUT THE EAS

Congratulations on purchasing the Edge Accessory System (EAS)

for all your future Accessory needs.

The CS and CTS devices are equipped with an expandable acces-

sories port which interfaces with the EAS.

With the EAS Expandable option you can add multiple accessories

to the CS or CTS using a daisy-chain-style connection system.

The non-expandable options allows you to monitor a single EGT

probe.

NOTE: It is necessary for your CS or CTS device to be powered

up so that it can recognize that you have installed an EAS device.

This will need to be done prior to using MyStyle® to conﬁ gure

settings. See MyStyle® section for more information.

“DAISY CHAINING” THE EAS

In Figure 1, two EGT probes plus one JAB (Used in conjunction

with our Juice Product) device are chained together. This allows

the user to control the Juice module and read Engine Exhaust tem-

peratures in more than one area of the vehicle.

NOTE: (Juice Owners Only) There will never be a need for more

than one JAB (Juice Attitude Bridge) since only one Juice can be

used at a time.

NOTE: Always use the End Cap in any EAS Expandable assem-

bly.

1 2 3 4 5 6 7 8 9 ... 35 36

Pas de commentaire

Edge CTS Manuel d'utilisateur Page 4